Thermal wire stripping is an age-old method of stripping the insulative jacket from your wire with 100% assurance that you are not nicking the conductor. American Beauty offers a complete array of thermal wire stripping systems, hand pieces and elements, sure to meet your specific need.

The following products are related (similar model but different specifications, etc.) to Model 10517 featured on this page:

Model	Product Name	MSRP
10503	Standard Capacity Wirestripping System	$496.00
10503P	Production Capacity Wirestripping System	$520.00

The following products can be used as replacements for Model 10517 featured on this page:

Model	Product Name	MSRP
10520	Ni-Chrome Wirestripping Elements (Flat, Double Notched)	$11.40
10529	Ni-Chrome Wirestripping Elements (Flat, Single Notched)	$11.40
10545	Ni-Chrome Wirestripping Elements (Round, Single Notched)	$11.40

RoHS Compliant	Yes
Connection Type	Tapered Pins
Country of Origin	US
Package Length	9.50 in / 24.13 cm
Package Width	2.00 in / 5.08 cm
Package Height	2.00 in / 5.08 cm
Shipping Weight	.60 lbs / 0.27 kg

Other Product Data Sheets

Summary: Resistance heat is obtained by passing a safe, low voltage, high amperage current through a resistive alloy. As with all Resistance Wire-Stripping Handpieces, heat is generated local to the elements. Current is present for only so long as power is being applied to the Handpiece. The closed loop elements provide a path for the current from the Power Unit, through the Handpiece and back to the Power Unit.

Description: Regular Tweezer Thermal Wirestripping Handpiece. This handpiece is supplied with two Nickel-Chromium Elements for stripping insulation from wire. It is equipped with a four-foot (1.22 m) neoprene cable (14-2 HPN) with taper pin quick connect terminals for connecting to American Beauty^® Power Unit (push in turning clockwise until snug) and padded handles for operator comfort. This Handpieces uses Resistance Wire Elements to create heat in order to soften or melt through the outer jacket of the wire to be stripped.

• This Handpiece should not be operated above 100 watts.
• Maximum wattage that is shown reflects a 20-second maximum allowable heating duration. For shorter heating durations, higher wattages may be allowable.
  
  Uses: This American Beauty^® Thermal Wirestrippers were developed to remove insulation from #14 gauge and finer wire. This Wirestripper can successfully and cleanly remove insulation from low-temperature PVC up to and including high-temperature fluorocarbon types (PVC will require low heat settings - just to soften but not burn). Since heat is the essence to softening and parting the insulating material, time required to strip wire will vary with the type and thickness of the jacket, as well as the conductor size. Any shielding under the jacket will slow the softening time, but most insulation will strip cleanly without fraying, given time. Proper stripping method is to heat, twist and pull gently to remove the insulation.

  Please reference the General Operating Instructions for American Beauty^® Resistance Soldering Systems for more detailed operating instructions and guidelines.
  
  

  ---

  WARNING: ELECTRODES GENERATE A SIGNIFICANT AMOUNT OF HEAT WHEN POWER IS APPLIED. USE WITH CAUTION TO AVOID BURNS, FIRE OR OTHER POTENTIAL DAMAGE. DO NOT OPERATE NEAR COMBUSTABLE MATERIALS. NORMAL USE OF THIS PRODUCT IS LIKELY TO EXPOSE THE USER TO SOLDERS CONTAINING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER REPRODUCTIVE HARM) OR OTHER PROPOSITION 65 LISTED CHEMICALS.

  ---

  
  
  

Light-weight, palm-sized hand piece with comfort grip padding minimizes operator fatigue.

Wide variety of Ni-Chrome wire stripping elements are available allowing user to find the perfect fit for their application.